Few important methods for polishing the Stone Floors

To make the floor shiny, you have to follow some methods which we have explained in this article. All these methods are effective but sometimes due to certain reasons they may not give you perfect results but even then these methods are used more for Marble Benchtops Polishing in Sydney.

Polishing powders: In the polishing powders the fine grains of aluminium are present that act as an abrasive powder which on reacting with the chemical creates a bubble on the surface of the stone for shine. The process is like sanding with diamonds except for powder which is much finer in the case of marble. The process amplified by the addition of oxalic acid to create a similar reaction like crystallization whereas fine powder is put on the surface and is done wet with water to prepare the paste to buff into the stone.

Grinding: It is the most useful method used where the abrasive diamond is used on the surface of the floor used in the 4-inch diameter pads/discs. During the process more than five discs are placed on the bottom to drive plate held with Velcro. The repetition of the process is done with fine grids of diamonds until a mechanical shine is achieved.

Coatings: The coating is also called waxing which is done on the surface of the marble to create an artificial shine. To give shiny look to the surface liquid form of wax is applied on the surface with a sprayer. Some of it is applied and left as it is whereas others are buffed to achieve the shine. The process is done fast with a high-speed burnishing floor machine. The process is not beneficial for permeable stone.

Crystallization: In this process, chemicals are used for spraying on the stone. The chemical used is known as fluorosilicate which gets buffed in with the steel wool pads that lead to cause new, crystals to be formed on the surface. To spread the chemical floor machine is used with a special heavy drive plate which is used to create the heat and friction needed to form and polish the crystals.

So, all these are methods used for polishing the stone floors. To get clean and shiny marble you can hire the companies that are engaged in Marble Benchtops Polishing in Sydney. To hire the best and experienced option of the Marble Benchtops Polishing in Sydney search online for the company that has a good reputation and high customer rating and comments in the market. The professionals of these companies will help you to get the perfect floor.

Joe Mathew is the author of this article. For more information about Marble Benchtops Polishing in Sydney please visit the website.