Best Practices When It Comes to Properly Installing New Tyres

Having a set of properly installed tyres is one of the most important safety requirements for any vehicle. Unfortunately, many people overlook the need to have their tyres regularly inspected and/or replaced when necessary. With this in mind, here are 15 best practices when it comes to properly installing new tyres:

1. Selecting the Right Tyres – The first step towards ensuring your Tyre Fitting Ipswich is correctly installed is making sure you select the right ones for your vehicle. 

2. Checking Tyre Pressure – It’s critical to check each tyre’s pressure before installing them onto your vehicle. Underinflated tyres can lead to premature wear and tear while overinflated tyres can cause handling problems.

3. Balancing Tyres – Having your tyres balanced is essential for proper installation. A professional tyre shop should be able to balance each tyre perfectly so that there are no vibrations when you’re driving.

4. Alignment – After the tyres have been installed, it’s important to have the alignment checked by a professional. Improperly aligned wheels can cause uneven tread wear and decrease fuel efficiency.

5. Rotating Tyres – Regularly rotating your tyres helps ensure even wear across all four of them, which will help extend their lifespan considerably. It’s recommended that you rotate your tyres every 5,000 to 10,000 miles.

6. Torque – The lug nuts that hold the tyres onto your vehicle must be tightened to the correct torque levels for safety reasons. Having them too loose can cause problems while having them too tight can damage your hubs and bearings.

7. Spare Tyre – Don’t forget to check your spare tyre as well since it has a tendency to get forgotten over time. Make sure it has the same type of tread and pressure as the other four tyres on your vehicle.

8. Wheel Weights – Installing wheel weights is also essential for proper tyre installation. Wheel weights help balance out any unevenness in each tyre and make sure there are no vibrations when driving.

9. Check Retreaded Tyres – If you purchase retreaded tyres, it’s important to make sure they have been properly inspected and serviced before installation. Poorly done retreads can lead to a variety of problems with handling and safety.

10. Air Pressure Checks – After the new tyres have been installed, you should check the air pressure in them again several times a month for the first few weeks or months to ensure that everything is working as it should be.

11. Regular Maintenance – In addition to checking your tyre pressure regularly, you should also take the time to inspect each tyre visually for any signs of wear or damage. If anything looks out of place, replace the tyre immediately.

12. Tyre Disposal – If you do have to dispose of old tyres, make sure it’s done safely and responsibly. Most places have rules regarding tyre disposal so be sure to check with your local authorities before doing so.

13. Tread Depth – Make sure that each new tyre has at least 4/32nds of an inch of tread depth for optimal performance and safety reasons. Anything less than this can compromise the overall handling of your vehicle.

14. Storage – Proper storage is key when it comes to maintaining your tyres over the long run.

15. Replacing Tyres – When it comes time to replace your tyres, make sure you do so in sets of four rather than individually. This helps maintain even tread wear and traction across all four tyres.

16. Tyre Specialists – Last but not least, when it comes time to install your tyres, make sure you take them to an experienced tyre specialist who can do the job properly. This will help ensure that your vehicle is safe and reliable for years to come. 

17. Tyre Warranties – Be sure to check the warranty on your new tyres before installation as well. This will give you peace of mind that if something does go wrong, you’ll be covered for a certain period of time.

18. Tyre Pressure Monitoring System (TPMS) – Installing a TPMS in your vehicle is also important since it can alert you when there is an issue with the air pressure in one or more of your tyres. This could save you from a dangerous situation and costly repairs down the road.

19. Check Manufacturer's Specifications – Finally, make sure to double-check the manufacturer’s specifications for both the size and load rating on each Tyres Ipswich to ensure they are appropriate for your vehicle.

By following these tyre care and maintenance tips, you can help extend the lifespan of your tyres and keep yourself safe while on the road. With proper care and maintenance, you’ll be able to get the most out of them for years to come.  So don’t forget to give your tyres some TLC this summer. 

From routine inspections to replacing worn-out tyres, taking good care of your tyres is essential for a safe and reliable ride. These 19 simple steps will help ensure that your tyres remain in optimal condition so that you can enjoy peace of mind when driving.